Dell Networking S4810, Справочное руководство

Страница: 690 / 1761

disable
Globally disable GVRP.
S4810
Syntax
disable
To re-enable GVRP, use the
no disable
command.
Defaults Enabled.
Command
Modes CONFIGURATION-GVRP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related
Commands
gvrp enable — enables GVRP on physical interfaces and LAGs.
protocol gvrp — access GVRP protocol.
garp timers
Set the intervals (in milliseconds) for sending GARP messages.
S4810
Syntax
garp timers {join | leave | leave-all}
To return to the previous setting, use the
no garp timers {join | leave |
leave-all}
command.
Parameters
join Enter the keyword
join
then the number of milliseconds to
configure the join time. The range is from 100 to 147483647
milliseconds. The default is
200 milliseconds .
690
GARP VLAN Registration (GVRP)