Dell Networking S4810, Справочное руководство, Страница: 903 / 1761

show ip route
View information, including how they were learned, about the IP routes on the switch.
S4810
Syntax
show ip route [vrf vrf-name ] hostname | ip-address [ mask ]
[longer-prefixes] | list prefix-list | protocol [ process-id |
routing-tag ] | all | connected | static | summary]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword
vrf
and then the name of
the VRF to enable BGPv4 multicast mode for that VRF.
ip-address (OPTIONAL) Specify a name of a device or the IP address of
the device to view more detailed information about the
route.
mask (OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
longer-prefixes (OPTIONAL) Enter the keywords
longer-prefixes
to view
all routes with a common prefix.
list prefix-list (OPTIONAL) Enter the keyword
list
and the name of a
configured prefix list. For more information, refer to the
show ip route list command.
protocol (OPTIONAL) Enter the name of a routing protocol (
bgp
,
isis
,
ospf
,
rip
) or the keywords connected or static.
NOTE:
bgp
,
isis
,
ospf
, and
rip
.
• If you enter
bgp
, you can include the BGP
as-number
.
• If you enter
isis
, you can include the ISIS
routing-
tag
.
• If you enter
ospf
, you can include the OSPF
process-
id
.
process-id (OPTIONAL) Specify that only OSPF routes with a certain
process ID must be displayed.
routing-tag (OPTIONAL) Specify that only ISIS routes with a certain
routing tag must be displayed.
connected (OPTIONAL) Enter the keyword
connected
to view only the
directly connected routes.
all (OPTIONAL) Enter the keyword
all
to view both active and
non-active routes.
static (OPTIONAL) Enter the keyword
static
to view only routes
the
ip route
command configures.
summary (OPTIONAL) Enter the keyword
summary
. For more
information, refer to the show ip route summary command.
IPv4 Routing
903