Dell Networking S4810, Справочное руководство, Страница: 397 / 1761

Parameters
restart-time
seconds
Enter the keyword
restart-time
then the maximum
number of seconds to restart and bring-up all the peers. The
range is from 1 to 3600 seconds. The default is
120 seconds .
stale-path-time
seconds
Enter the keyword
stale-path-time
then the maximum
number of seconds to wait before restarting a peer’s stale
paths. The default is
360 seconds .
role receiver-
only Enter the keyword
role receiver-only
to designate the
local router to support graceful restart as a receiver only.
Defaults as above
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
This feature is advertised to BGP neighbors through a capability advertisement. In
Receiver Only mode, BGP saves the advertised routes of peers that support this
capability when they restart.
BGP graceful restart is active only when the neighbor becomes established.
Otherwise it is disabled. Graceful-restart applies to all neighbors with established
adjacency.
This command automatically restarts the BGP instance for the configuration to
take effect.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
S4810 S6000
Syntax
bgp non-deterministic-med
To return to the default, use the
no bgp non-deterministic-med
command.
Border Gateway Protocol
397