Dell Networking S4810, Справочное руководство

Страница: 396 / 1761

Defaults Disabled (supports 2–byte format)
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
Routers supporting 4-byte ASNs advertise that function in the OPEN message. The
behavior of a 4-byte router is slightly different depending on whether it is speaking
to a 2-byte router or a 4-byte router.
When creating Confederations, all the routers in the Confederation must be 4 byte
or 2 byte identified routers. You cannot mix them.
Where the 2-byte format is from 1 to 65535, the 4-byte format is from 1 to
4294967295. Both formats are accepted and the advertisements reflect the
entered format.
For more information about using the 2 byte or 4-byte format, refer to the Dell
Networking OS Configuration Guide .
This command automatically restarts the BGP instance for the configuration to
take effect.
bgp graceful-restart
To support graceful restart as a receiver only, enable graceful restart on a BGP neighbor, a BGP node, or
designate a local router.
S4810
Syntax
bgp graceful-restart [restart-time seconds ] [stale-path-time
seconds ] [role receiver-only]
To return to the default, use the
no bgp graceful-restart
command.
396
Border Gateway Protocol