Dell Networking S4810, Справочное руководство

Страница: 1492 / 1761

key Enter a text string, up to 42 characters long, as the clear text
password. Leading spaces are ignored.
Defaults Not configured.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Authentication key length increased to 42 characters.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Usage
Information The key configured with this command must match the key configured on the
daemon.
tacacs-server vrf
Create an association between a TACACS server group and a VRF and source interface..
S4810
Syntax
tacacs-server vrf vrf-name [source-interface interface]
To delete the association between a TACACS server group and a VRF and source
interface, use the
no tacacs-server vrf vrf-name [source-interface
interface ]
command.
Parameters
vrf vrf-name Enter the keyword
vrf
and then the name of the VRF to
associate a TACACS server group with that VRF.
interface Enter the following keywords and slot/port or number
information:
• For a 100/1000 Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
1492
Security