Dell Networking S4810, Справочное руководство

Страница: 163 / 1761

write
Copy the current configuration to either the startup-configuration file or the terminal.
S4810
Syntax
write {memory | terminal}
Parameters
memory Enter the keyword
memory
to copy the current running
configuration to the startup configuration file. This
command is similar to the
copy running-config
startup-config
command.
terminal Enter the keyword
terminal
to copy the current running
configuration to the terminal. This command is similar to the
show running-config
command.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0 Introduced on the S4820T.
Version
8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information The
write memory
command saves the running-configuration to the file labeled
startup-configuration. When using a LOCAL CONFIG FILE other than the startup-
config not named “startup-configuration” (for example, you used a specific file
during the
boot config
command), the running-config is not saved to that file;
use the
copy
command to save any running-configuration changes to that local
file.
Related
Commands save — saves configurations created in BOOT_USER mode (BCLI).
Control and Monitoring
163