Dell Networking S4810, Справочное руководство

Страница: 1613 / 1761

Version 8.3.7.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.7.1.0 Introduced on the S-Series.
Related
Commands
• reload – reboots Dell Networking OS.
stack-unit provision
Preconfigure a logical stacking ID of a switch that joins the stack. This is an optional command that is
executed on the management unit.
S4810
Syntax
stack-unit [ stack-unit ] provision {S25N|S25P|S25V|S50N|S50V|
Z9000|S4810|S4820T}
Parameters
stack-unit Enter a stack member identifier of the switch that you want
to add to the stack.
S25N|S25P|
S25V|S50N|
S50V|Z9000|
S4810|S4820T Enter the model identifier of the switch to be added as a
stack member. This identifier is also referred to as the
provision type .
Defaults When this value is not set, a switch joining the stack is given the next available
sequential stack member identifier.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.11.1 Introduced on the Z9000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Related
Commands
• reload – reboots Dell Networking OS.
Stacking
1613