Dell Networking S4810, Справочное руководство

Страница: 300 / 1761

IP Community List Commands
IP community list commands are supported on the S4810 platform.
ip community-list
Enter COMMUNITY-LIST mode and create an IP community-list for BGP.
S4810
Syntax
ip community-list comm-list-name
To delete a community-list, use the
no ip community-list comm-list-name
command.
Parameters
comm-list-
name Enter a text string as the name of the community-list, up to
140 characters.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
pre-Version
6.1.1.0 Introduced on the E-Series.
Example
Dell(conf)#ip community-list TestComList
Dell(config-community-list)#
show ip community-lists
Display configured IP community lists in alphabetic order.
S4810
Syntax
show ip community-lists [ name ]
Parameters
name (OPTIONAL) Enter the name of the standard or extended IP
community list, up to 140 characters.
300
Access Control Lists (ACL)