Dell Networking S4810, Справочное руководство

Страница: 424 / 1761

Usage
Information Other BGP filtering commands include:
neighbor filter-list
,
ip as-path
access-list
, and
neighbor route-map
.
Related
Commands
ip as-path access-list — configures IP AS-Path ACL.
neighbor route-map — assigns a route map to a neighbor or peer group.
neighbor ebgp-multihop
Attempt and accept BGP connections to external peers on networks that are not directly connected.
S4810
Syntax
neighbor { ip-address | peer-group-name } ebgp-multihop [ ttl ]
To disallow and disconnect connections, use the
no neighbor { ip-address |
peer-group-name } ebgp-multihop
command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name Enter the name of the peer group.
ttl (OPTIONAL) Enter the number of hops as the Time to Live
(ttl) value. The range is from 1 to 255. The default is
255 .
Defaults Disabled.
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information To prevent loops, the
neighbor ebgp-multihop
command does not install the
default routes of the multihop peer. Networks not directly connected are not
considered valid for best-path selection.
424
Border Gateway Protocol