BRP Outlander 400 EFI 2008, Руководство по обслуживанию

Страница: 432 / 434

Section 10 WIRING DIAGRAM
Subsection 01 (OUTLANDER 400 EFI)
OUTLANDER 400 EFI
WIRING DIAGRAM
INFORMATION
NOTE: The wiring diagrams are in the manual back
cover pocket.
The wiring diagrams use the following codes.
V00G0FA
2-BF-A XX/XX-18
1 2 3 4 5
1. Wire colors
2. Wire gauge
3. Connector location area
4. Connector identification
5. Terminal location in connector
Wire Colors
It identifies the color of a wire. When a 2-color
scheme is used, the first color is the main color
while the second color is the tracer color.
XX/XX
XX/XX
V06G1FA
-18 2-BF-A
THE SHADED PART INDICATES THE WIRE COLOR
Example: YL/BK is a YELLOW wire with a BLACK
stripe.
Wire Gauge
The number after wire color indicates the gauge
of a wire.
V06G1GA
2-BF-A XX/XX- 18
18
THE SHADED PART INDICATES THE WIRE GAUGE
Connector Location Area
V06G1HA
-BF-A XX/XX-18
2
2
THE SHADED PART INDICATES THE CONNECTOR LOCATION
AREA
V07A0HA
3
2
4
1
5
AREA LOCATION
1
Steering area
2 ECM area
3 Front of vehicle
4 Engine area
5 Rear of vehicle
Connector Identification
Indicates the connector individually. If there are
many connectors in the same area, this helps to
identify which wire is in which connector.
2- BF -A
V06G1JA
XX/XX-18
BF
BF
THE SHADED PART INDICATES A CONNECTOR IDENTIFICATION
Terminal Location in Connector
This is the terminal position in the connector. The
number or letter given refers to the physical iden-
tification stamped on the connector.
NOTE: If no letter or number is indicated on the
connector, they are indicated where there is a spe-
cific test using this connector.
2- BF- A
XX/XX
A
A
vmr2008-038-004_a
THE SHADED PART INDICATES THE TERMINAL LOCATION IN
CONNECTOR
vmr2008-153
439