INTRODUCTION
TIGHTENING TORQUE
Tighten fasteners to torque mentioned in explod-
ed views and/or text, When they are not specified,
refer to following table.
WARNING
Torque
wrench
tightening
specifications
must strictly be adhered to.
Locking devices (e.g.: locking tabs, elastic
stop nuts, self-locking fasteners, cotter pins,
etc.) must be replaced with new ones.
In order to avoid a poor assembling, tighten
screws, bolts or nuts in accordance with the
following procedure:
Manually screw all screws, bolts and/or nuts.
Apply the half of the recommended torque value.
CAUTION: Be sure to use proper tightening
torque for the proper strength grade.
NOTE:
When possible, always apply torque on the
nut.
Torque at the recommended torque value.
NOTE:
Always torque screws, bolts and/or nuts in
a crisscross sequence.
A00A8BS
Property
class and
head
markings
Property
class and
nut
markings
5
5
8
8
10
10
12
12
4.8
4.8
4.8
8.8
8.8
8.8
9.8
9.8
9.8
10.9
10.9
10.9
12.9
12.9
12.9
12.9
FASTENER GRADE/TORQUE
FASTENER
SIZE
5.8
Grade
8.8
Grade
10.9
Grade
12.9
Grade
M4
1.5 – 2 N•m
(13 – 18 lbf•
in
)
2.5 – 3 N•m
(22 – 27 lbf•
in
)
3.5 – 4 N•m
(31 – 35 lbf•
in
)
4 – 5 N•m
(35 – 44 lbf•
in
)
M5
3 – 3.5 N•m
(27 – 31 lbf•
in
)
4.5 – 5.5 N•m
(40 – 47 lbf•
in
)
7 – 8.5 N•m
(62 – 75 lbf•
in
)
8 – 10 N•m
(71 – 89 lbf•
in
)
M6
6.5 – 8.5 N•m
(58 – 75 lbf•
in
)
8 – 12 N•m
(71 – 106 lbf•
in
)
10.5 – 15 N•m
(93 – 133 lbf•
in
)
16 N•m (142 lbf•
in
)
M8
15 N•m (133 lbf•
in
)
25 N•m (18 lbf•ft)
32 N•m (23 lbf•ft)
40 N•m (30 lbf•ft)
M10
29 N•m (21 lbf•ft)
48 N•m (35 lbf•ft)
61 N•m (45 lbf•ft)
73 N•m (53 lbf•ft)
M12
52 N•m (38 lbf•ft)
85 N•m (63 lbf•ft)
105 N•m (77 lbf•ft)
128 N•m (94 lbf•ft)
M14
85 N•m (63 lbf•ft)
135 N•m (100 lbf•ft)
170 N•m (125 lbf•ft)
200 N•m (148 lbf•ft)
vmr2008-113
XI
Содержание Outlander 400 EFI 2008
Страница 2: ......
Страница 433: ...2008 2015 OUTLANDER 400 EFI vdd2014 001 001 GENERAL SYSTEM...
