Avaya DEFINITY Server R, Руководство пользователя

Страница: 89 / 550

Phase 2 Hardware Addition/Replacement
Issue 7 November 2003 2-41 555-233-115
Set Locations (if necessary)
After you set the daylight savings rules, you must set the locations for all cabinets.
It is possible to have cabinets in different time zones.
1. Type change locations and press
Enter
.
2. Type y in the
ARS Prefix 1 Required for 10-Digit NANP
Calls?
field.
3. Type the information in the various fields for each switch.
NOTE:
Use the name of the switch or “Local Switch” in the
Name
field for the
first location.
4. Press
Enter
to effect the changes.
Release MMI (High/Critical reliability only)
1. Type release board cabinet carrier slot and press
Enter
to release the
circuit packs, which were busied out earlier.
Page 1 of 3
LOCATIONS
ARS Prefix 1 Required for 10-Digit NANP Calls? _
Number Name Timezone Daylight-Savings Number Plan
Offset Rule Area Code
1 Main________________ + 00:00 _1 303
2 ____________________ _ __:__ __ ___
3 ____________________ _ __:__ __ ___
4 ____________________ _ __:__ __ ___
5 ____________________ _ __:__ __ ___
6 ____________________ _ __:__ __ ___
7 ____________________ _ __:__ __ ___
8 ____________________ _ __:__ __ ___
9 ____________________ _ __:__ __ ___
10 ____________________ _ __:__ __ ___
11 ____________________ _ __:__ __ ___
12 ____________________ _ __:__ __ ___
13 ____________________ _ __:__ __ ___
14 ____________________ _ __:__ __ ___