Avaya DEFINITY Server R Скачать руководство пользователя страница 46

Страница: 46 / 550

Upgrading Release 9/10r to Avaya DEFINITY Server R
Running Avaya Communication Manager

555-233-115

1-30

Issue 7 November 2003

16. Click on the Continue Registration button at the bottom of the page.

ART begins automatically registering the product and displays progress
messages to indicate the current status.

CAUTION:

DO NOT exit your browser or click on the Refresh, Back, Stop, or
Home buttons while ART displays these progress messages.

If you have to abort your registration, click on the Abort Session
button that appears with one of the progress messages.

If the preceding steps have been completed successfully, ART displays the
DEFINITY Upgrade Registration Report.

17. Review the information displayed in the report.

If any of the data are incorrect, contact the DBA Group (1-800-248-1234,
selecting prompt, 2, prompt 6, then prompt 2) immediately for assistance.

18. Save the DEFINITY Upgrade Registration Report in a file for future

reference or print the report and keep the copy.

Save Translations to Disk

1. Type save translation and press

RETURN

to copy upgraded translations

from the removable media to the disk drive, which takes about 2 minutes.

2. When the system asks you whether to preserve the License File or not,

respond with Yes.

Save Translation to Back Up Disk

1. Type backup disk and press

RETURN

to back up all changed files to the

removable media. This takes about 15 minutes.

2. Type test stored-data and press

RETURN

to verify the consistency of the

MSS files on the disk and removable media.

Standard Reliability

1. Type list configuration software-version and press

RETURN

to verify all

the files one last time.

High or Critical Reliability

1. Type list configuration software-version long and press

RETURN

verify all the files one last time.

Содержание DEFINITY Server R







































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DEFINITY Server R

Отзывы:

Похожие инструкции для DEFINITY Server R

Бренды по названию

Популярные бренды

Avaya DEFINITY Server R, Руководство пользователя

Результаты поиска

Содержание DEFINITY Server R

Отзывы:

Похожие инструкции для DEFINITY Server R

Бренды по названию

Популярные бренды