37
Taillight Assembly
REMOVING
1. Remove the cap screws and lock nuts securing the
taillight assembly to the ROPS tube.
2. Disconnect the wire connector; then remove the
socket assembly and remove the bulb.
INSPECTING
1. Inspect wiring harness, three-prong connector, lens,
base, cap screws, and socket for damage.
2. Inspect all wires for corroding, pinching, and cracking.
3. Inspect the bulb for wattage, voltage, and proper
operation.
INSTALLING
1. Install the new bulb in the socket and place the
socket assembly into the taillight housing. Twist
clockwise to lock.
2. Connect the wire connector; then install on the
ROPS tube and secure with two cap screws and lock
nuts. Tighten securely.
Seat
REMOVING/INSTALLING
1. To remove the seat, raise the front of the seat and
slide it forward.
2. To install the seat, slide the rear of the seat into the seat
retainers and push down firmly on the front of seat.
Seat Backs
REMOVING/INSTALLING
1. To remove the first and second row seat backs,
remove the four cap screws securing the seat back to
the frame; then remove the seat back.
2. To install the first and second row seat backs, posi-
tion the seat back on the frame; then secure with the
four cap screws.
HDX358A
HDX335A
First Row
Second Row
Содержание HDX CREW 2017
Страница 1: ...2017 S SERVICE ERVICE MANUAL ANUAL www arcticcat com...
Страница 151: ...150 NOTES...