Arctic Cat HDX CREW 2017, Руководство по обслуживанию

Страница: 51 / 152

50
6. Using an awl, rotate the C-ring in its groove until it is
out of the cylinder head; then remove the C-ring.

NOTE: Care should be taken not to drop the C-ring
down into the crankcase.
CC012D
7. Bend the washer tabs down and remove the two cap
screws securing the sprocket to the camshaft; then
drop the sprocket off the camshaft.
CC013D
8. While holding the chain, slide the sprocket and cam-
shaft out of the cylinder head.
H1-036

NOTE: Loop the chain over the cylinder head and
secure it to keep it from falling into the crankcase.
9. Remove the cam chain guide.
H1-037A
10. Remove the five nuts securing the cylinder head to
the cylinder.
CC017D
CC018D
11. Remove the four cylinder head bolts.
12. Remove the cylinder head from the cylinder, remove
the gasket, and account for two alignment pins; then
remove the cam chain guide.
CC020D