ahlmann AS 65, Руководство по эксплуатации

Страница: 259 / 292

6.1 11.2 11.1 10.3 11.1 7,4 7.1/7.2/7.3
3.1/3.2/3.3/3.4/4.1/10.1/10.2 5.1 5.2 4.2 5.1 5.2 2.1/2.2/2.3/2.4/2.5/2.6/4.1
1.1/1.2/1.3
11.1
9.1
GB
Item Designation Specification Viscosity Filling amount
1 Motor oil MIL-L-2104 C = API-CD acc. to manufacturer ca. 10 l with oil filter
2.2 Transmission oil MIL-L-2105 D = API-GL5-6 SAE 85 W 90 ca. 4.5 l
2.4 Transmission oil MIL-L-2105 D = API-GL5-6 SAE 85 W 90 ca. 2x 0.5 l
2.6 Transmission oil MIL-L-2105 D = API-GL5-6 SAE 85 W 90 ca. 0.5 l (20 km/h)
ca. 3.0 l (30 km/h)
3.2 Transmission oil MIL-L-2105 D = API-GL5-6-LS SAE 85 W 90-LS ca. 3.0 l
with LS additive
3.4 Transmission oil MIL-L-2105 D = API-GL5-6 SAE 85 W 90 ca. 2x 0.5 l
7.3 Hydraulic oil (4) DIN 51524, HVLP 46 ISO VG 46, VI > 180 ca. 120 l
8 Grease DIN 51825 - KPF 1/2 N-20 as required
9 Distilled water as required
10 Mineral oil DIN 51524, HVLP 46 ISO VG 46, VI > 180 as required
10 50
500
1500
Item
Every x operating hours max. permitted intervals or
shorter (depending on use)
*
Maintenance points
1. Engine
1.1 Maintenance according to manufacturer's regulations
1.2 Dry air filter system
Activate dust removal valve
Check maintenance display
1.3 Replace filter element if maintenance display is red
2 Rear axle with axle power shift gear or gear shift
2.1 Check oil level in axle gear (control screw)
2.2 Change oil in axle gear
2.3 Check oil level in planetary gear (control screw)
2.4 Change oil in planetary gear
2.5 Check oil level in power shift gear (control screw)
2.6 Change oil in power shift gear
3 Front axle
3.1 Check oil level in axle gear (control screw)
3.2 Change oil in axle gear
3.3 Check oil level in planetary gear (control screw)
3.4 Change oil in planetary gear
4 Axles / cardan shaft(s)
4.1 Check fastening of axles (385Nm)
4.2 Check fastening of cardan shaft(s) (32 Nm)
5 Wheels and tyres
5.1 Check air pressure
5.2 Check fastening of wheel nuts (385 Nm)
6 Ball bearing slewing ring (swivel loader only)
6.1 Check fastening (300 Nm)
7 Hydraulic system
7.1 Replace filter inserts, observe electric control lamp
7.2 Oil level check (view glass)
7.3 Oil change
7.4 Check and clean hydraulic oil cooler
8 Lubrication points (indicated in red)
9 Battery
9.1 Visual check
10 Brake system
10.1 Service and parking brake: Take function and visual check before starting work
10.2 Service brake: check brake lining, adjust if necessary
10.3 Service brake: visually check compensation tank
10.3 Parking brake: check and adjust if required
11 Lighting system / fresh air filter
11.1 Take function test before starting work
11.2 Check fresh air filter
Lubrication points (indicated in red)
1. Lubricate bolts every 10 operating hours with
grease acc. to DIN 51825 - KPF 1/2 N-20.
2. Lubricate glide points as required and always
after cleaning, using grease acc. to DIN 51825 -
KPF 1/2 N-20.
Oil lubrication points
3. Lubricate joints and toggle levers every 50
operating hours wih engine oil MIL-L-2104 C.
Optional features: Biodegradable hydraulic oil
4. Ester-based synthetic hydraulic oil. Viscosity
class ISO VG 46 VI > 180
CAUTION Use only mineral oil for the
service brake!
Key to symbols
First oil change / first filter replacement
first check; eliminate any determined problems
Check; eliminate any determined problems
Change
The markings, filling and check plugs
are binding
Refer to operating instructions
Caution
When carrying out maintenance work, heed
the accident prevention regulations!
**
*
*
*
*
*
*
4102177A
8.4 Maintenance Plan
8-21
S05D/S06D