1MAC050144-MB C
Section 3
Basic functions
615 series ANSI
57
Technical Manual
The self-supervision signal output operates on the closed circuit principle. Under normal
conditions the relay is energized and the contact gap 3-5 in slot X100 is closed. If the
auxiliary power supply fails or an internal fault is detected, the contact gap 3-5 is opened.
Figure 6:
Output contact
The internal fault code indicates the type of internal IED fault. When a fault appears,
record the code so that it can be reported to ABB customer service.
Table 35:
Internal fault indications and codes
Fault indication
Fault code
Additional information
Internal Fault
System error
2
An internal system error has occurred.
Internal Fault
File system error
7
A file system error has occurred.
Internal Fault
Test
8
Internal fault test activated manually by the user.
Internal Fault
SW watchdog error
10
Watchdog reset has occurred too many times
within an hour.
Internal Fault
SO-relay(s),X100
43
Faulty Signal Output relay(s) in card located in
slot X100.
Internal Fault
SO-relay(s),X110
44
Faulty Signal Output relay(s) in card located in
slot X110.
Internal Fault
PO-relay(s),X120
45
Faulty Signal Output relay(s) in card located in
slot X120.
Internal Fault
PO-relay(s),X130
46
Faulty Signal Output relay(s) in card located in
slot X130.
Internal Fault
SO-relay(s),X100
53
Faulty Power Output relay(s) in card located in
slot X100.
Internal Fault
SO-relay(s),X110
54
Faulty Power Output relay(s) in card located in
slot X110.
Internal Fault
SO-relay(s),X120
55
Faulty Power Output relay(s) in card located in
slot X120.
Internal Fault
SO-relay(s),X130
56
Faulty Power Output relay(s) in card located in
slot X130.
Internal Fault
Light sensor error
57
Faulty ARC light sensor input(s).
Table continues on next page
Содержание 615 Series ANSI
