ABB 615 Series ANSI, Техническое руководство

Страница: 428 / 713

1MAC050144-MB C
Section 6
Supervision functions
615 series ANSI 421
Technical Manual
Figure 216: Functional module diagram for counting circuit breaker operations
Operation counter
The operation counter counts the number of operations based on the state change of the
binary auxiliary contacts inputs
POSCLOSE
and
POSOPEN
.
The number of operations
NO_OPR
is available through the Monitored data view on the
LHMI or through tools via communications. The old circuit breaker operation counter
value can be taken into use by writing the value to the parameter and in the clear menu
from WHMI or LHMI.
Alarm limit check
The operation alarm is generated when the number of operations exceeds the value set
with the threshold setting. However, if the number of operations increases further and
exceeds the limit value set with the setting, the output is activated.
The binary outputs and are deactivated when the
BLOCK
input is activated.
6.1.4.5 Accumulation of I
y
t
Accumulation of the I
y
t module calculates the accumulated energy.
The operation of the module can be described by using a module diagram. All the modules
in the diagram are explained in the next sections.
Figure 217: Functional module diagram for calculating accumulative energy and
alarm
Accumulated energy calculator
This module calculates the accumulated energy I
y
t. The factor y is set with the Current
exponent setting.
The calculation is initiated with the
POSCLOSE
input open events. It ends when the RMS
current becomes lower than the Acc stop current setting value.