1MAC050144-MB C
Section 3
Basic functions
615 series ANSI
107
Technical Manual
GUID-43078009-323D-409C-B84A-5EB914CDEE53 V1 EN
Figure 43:
Load profile record file naming
3.15.1.4
Clearing of record
The load profile record can be cleared with
Reset load profile rec
via HMI, communication
or the ACT input in PCM600. Clearing of the record is allowed only on the engineer and
administrator authorization levels.
The load profile record is automatically cleared if the quantity selection parameters are
changed or any other parameter which affects the content of the COMTRADE
configuration file is changed. Also, if data source for selected quantity is removed, for
example, with ACT, the load profile recorder stops recording and previously collected data
are cleared.
3.15.2
Configuration
The load profile record can be configured with the PCM600 tool or any tool supporting the
IEC 61850 standard.
The load profile record can be enabled or disabled with the
Operation
setting under the
Configuration/Load Profile Record
menu.
The mapping is done with the
Quantity selection
setting of the corresponding quantity
channel.
The recording buffer is filled in FIFO manner, meaning that oldest data is overwritten by
newest data. If oldest data is considered important,
Mem. warning level
and
Mem. alarm
level
parameters can be set to get notification about memory consumtion reaching certain
level. Therefore the data can be uploaded before oldest data gets overwritten. To re-enable
notifications via
Mem. warning level
and
Mem. alarm level
parameters, the load profile
record should be cleared after uploading. State change of
Mem. warning level
or
Mem.
alarm level
parameters generates an event.
Содержание 615 Series ANSI
