ABB 615 Series ANSI, Техническое руководство

Страница: 200 / 713

1MAC050144-MB C
Section 4
Protection functions
615 series ANSI 193
Technical Manual
4.1.6.13 Technical data
Table 177: 67/51N and 67/50N Technical data
4.1.6.14 Technical revision history
Table 178: 67/50N Technical revision history
Table 179: 67/51N Technical revision history
Characteristic Value
Pickup accuracy Depending on the frequency of the current
measured: f
n
±2Hz
67/51N and 67/50N-1 Current:
±1.5% of the set value or ±0.002 x I
n
Voltage
±1.5% of the set value or ±0.002 x V
n
Phase angle:
±2°
67/50N-2 Current:
±1.5% of the set value or ±0.002 x I
n
(at currents in the range of 0.1…10 x I
n
)
±5.0% of the set value
(at currents in the range of 10…40 x I
n
)
Voltage:
±1.5% of the set value or ±0.002 x V
n
Phase angle:
±2°
Pickup time
12
1. Measurement mode = default (depends on stage), current before fault = 0.0 x I
n
, f
n
= 60 Hz, ground-fault
current with nominal frequency injected from random phase angle, results based on statistical distribution of
1000 measurements
2. Includes the delay of the signal output contact
Minimum Typical Maximum
67/50N-2 and 67/51N
and 67/50N-1:
I
Fault
= 2 x set Pickup
value
61 ms 64 ms 66 ms
Reset time < 40 ms
Reset ratio Typical 0.96
Retardation time < 30 ms
Trip time accuracy in definite time mode ±1.0% of the set value or ±20 ms
Trip time accuracy in inverse time mode
±5.0% of the theoretical value or ±20 ms
3
3. Maximum Pickup value = 2.5 x I
n
, Pickup value multiples in range of 1.5 to 20
Suppression of harmonics RMS: No suppression
DFT: -50dB at f = n x f
n
, where n = 2, 3, 4, 5,…
Peak-to-Peak: No suppression
Technical revision Change
B Maximum value changed to 180 deg for the
Max
forward angle setting
Technical revision Change
B Maximum value changed to 180 deg for the Max
forward angle
setting.
Pickup value step changed to 0.005