3-11
INSP
ADJ
E
POWER UNIT/ELECTRICAL
3. Measure:
●
Spark plug gap
a
Out of specification
→
Regap.
Spark plug gap:
0.7–0.8 mm (0.028–0.031 in)
4. Tighten:
●
Spark plug
NOTE:
●
Before installing the spark plug, clean the
gasket surface and spark plug surface.
Also, it is suggested to apply a thin film of
anti-seize compound to the spark plug
threads to prevent thread seizure.
●
If a torque wrench is not available, a good
estimate of the correct tightening torque
for a new spark plug is to finger tighten
a
the spark plug and then tighten it another
1/4 to 1/2 of a turn
b
.
T
R
.
.
Spark plug:
25 N • m (2.5 kgf • m, 18 ft • lb)
ELECTRICAL
Battery inspection
WARNING
Battery electrolyte is poisonous and dan-
gerous, causing severe burns, etc. Electro-
lyte contains sulfuric acid. Avoid contact
with skin, eyes or clothing.
Antidotes
External: Flush with water.
Internal: Drink large quantities of water or
milk. Follow with milk of magnesia, beaten
egg or vegetable oil. Call physician immedi-
ately.
Eyes: Flush with water for 15 minutes and
get prompt medical attention.
