Yamaha waverunner xlt800, Service Manual

Page: 356 / 499

7-25
E
– +
ELEC
CHARGING SYSTEM
FUSE
Refer to “STARTING SYSTEM”.
BATTERY
Refer to “ELECTRICAL” in chapter 3.
RECTIFIER/REGULATOR PEAK
VOLTAGE
1. Measure:
● Rectifier/regulator output peak
voltage
Below specification
→
Measure the
lighting coil output peak voltage or
replace the rectifier/regulator.
NOTE:
Make sure the output lead (red lead)
1
of
the rectifier/regulator is disconnected when
measuring the output peak voltage.
Rectifier/regulator output peak
voltage:
Red (R) – Black (B)
r/min
Unloaded
Cranking 2,000 3,500
V 7.5 12.5 12.5
1
LIGHTING COIL PEAK VOLTAGE
1. Measure:
● Lighting coil output peak voltage
Below specification
→
Replace the
lighting coil.
NOTE:
Make sure the output lead (red lead) 1 of
the rectifier/regulator is disconnected when
measuring the output peak voltage.
Lighting coil output peak voltage:
Green (G) – Green (G)
r/min
Unloaded Loaded
Cranking 2,000 3,500
V 8.5 8.5 13 13
1