Yamaha waverunner xlt800, Service Manual

Page: 40 / 499

2-4
SPEC
E
MAINTENANCE SPECIFICATIONS
JET PUMP UNIT
HULL AND HOOD
CARBURETORS
Type Floatless
Identification mark #1: 67A-01, #2: 67A-02
Main nozzle mm (in) 3.0 (0.12)
Main jet 150
Pilot jet 90
Low-speed adjusting screw Turns out #1: 1-5/8, #2: 1-3/4
Throttle valve 120
Valve seat size mm (in) 1.2 (0.05)
High-speed adjusting screw Turns out #1: 1/2, #2: 1/2
Trolling speed r/min 1,300
±
50
REED VALVES
Thickness mm (in) 0.52 (0.020)
Reed valve stopper height mm (in) 10.8–11.4 (0.43–0.45)
Reed valve warpage limit mm (in) 0.2 (0.01)
Item Unit
Model
XLT800
JET PUMP
Impeller material Stainless steel
Number of impeller blades 3
Impeller pitch angle Degree 13.5
Impeller clearance mm (in) 0.35–0.45 (0.014–0.018)
Impeller clearance limit mm (in) 0.6 (0.024)
Drive shaft runout limit mm (in) 0.3 (0.012)
Nozzle diameter mm (in) 86.8 (3.42)
Item Unit
Model
XLT800
FREE PLAY
YPVS cable slack mm (in) 0.5–1.5 (0.02–0.06)
Throttle lever free play mm (in) 4–7 (0.16–0.28)
Item Unit
Model
XLT800