Yamaha FX140, Service Manual

Page: 94 / 868

3-1
E
INSP
ADJ
MAINTENANCE INTERVAL CHART
MAINTENANCE INTERVAL CHART
The following chart should be considered strictly as a guide to general maintenance intervals.
Depending on operating conditions, the intervals of maintenance should be changed.
(
●
) This mark indicates maintenance that you may do yourself.
(
❍
) This mark indicates work to be done by a Yamaha dealer.
*1: Grease capacity: 33.0–35.0 cm
3
(1.11–1.18 oz)
*2: Grease capacity: 6.0–8.0 cm
3
(0.20–0.27 oz)
MAINTENANCE INTERVAL INITIAL
THEREAFTER
EVERY
PAGE
10 hours 50 hours 100 hours 100 hours 200 hours
ITEM
6
months
12
months
12
months
24
months
Spark plug Inspect, clean, adjust
● ● ● ●
3-21
Lubrication points Lubricate
● ●
3-29
Intermediate housing Lubricate
❍
*1
●
*2
●
*2 3-31
Fuel system Inspect
❍ ❍
3-9
Fuel tank Clean
❍ ❍
3-9
Fuel filter Inspect, clean
❍ ❍
3-9
Trolling speed Inspect
❍ ❍ ❍
3-8
Throttle shaft Inspect
❍ ❍
—
Cooling water passages Flush
●
(after
every use)
—
Water inlet strainer Inspect, clean
❍ ❍
3-27
Bilge strainer Clean
❍ ❍
3-27
Electric bilge pump
strainer
Inspect, clean
❍ ❍
3-28
Impeller Inspect
● ● ●
3-26
Steering cable Inspect
● ● ●
3-2
Steering master Inspect
❍ ❍ ❍
3-2
QSTS mechanism Inspect, adjust
●
(before
every use)
❍ ❍
3-5
Shift cable and
mechanism
Inspect, adjust
❍ ❍
3-7
Throttle cable Inspect, adjust
● ●
3-3
Stern drain plugs Inspect, replace
❍ ❍
3-28
Battery Inspect
●
(inspect
fluid level
before
every use)
❍ ❍
3-23
Rubber coupling Inspect
❍
—
Engine mount Inspect
❍
5-7
Nuts and bolts Inspect
❍ ❍ ❍
—
Air filter Inspect
●
3-20
Engine oil Replace
❍ ❍ ❍
3-18
Engine oil filter Replace
❍
3-18
Valve clearance Inspect, adjust
❍
3-10