WEG CFW700, Programming And Troubleshooting Manual

Page: 177 / 223

Read only Parameters
16
CFW700 | 16-5
P0023 – Software Version
Refer to the section 6.1 - Inverter Data , for more details.
P0028 – Accessories Configuration
P0029 – Power Hardware Configuration
Refer to the section 6.1 - Inverter Data .
P0030 – IGBTs Temperature
P0034 – Internal Air Temperature
Refer to the section 15.3 - Protections .
P0036 – Heatsink Fan Speed
Adjustable
Range:
0 to 15000 rpm Factory
Setting:
Properties: ro
Access groups
via HMI:
READ
Description:
It indicates the fan actual speed, in revolutions per minute (rpm).
P0037 – Motor Overload Status
Adjustable
Range:
0 to 100 %
Factory
Setting:
Properties: ro
Access groups
via HMI:
READ
Description:
It indicates the actual overload percentage of the motor. When this parameter reaches 100 % the fault “Motor
Overload” (F072) will occur.
P0038 – Encoder Speed
Adjustable
Range:
0 to 65535 rpm Factory
Setting:
Properties:
ro
Access groups
via HMI:
READ
Description:
It indicates the encoder actual speed, in revolutions per minute (rpm), through a 0.5 second filter.