WEG CFW700, Programming And Troubleshooting Manual

Page: 139 / 223

Digital and Analog Inputs and Outputs
13
CFW700 | 13-9
13.1.3 Digital Inputs
The CFW700 has 8 digital inputs in the standard version. The parameters that configure those inputs are presented
next.
P0012 – DI8 to DI1 Status
Adjustable
Range:
Bit 0 = DI1
Bit 1 = DI2
Bit 2 = DI3
Bit 3 = DI4
Bit 4 = DI5
Bit 5 = DI6
Bit 6 = DI7
Bit 7 = DI8 Factory
Setting:
Properties: ro
Access groups
via HMI:
READ or I/O
Description:
By means of this parameter it is possible to visualize the status of the 8 control board digital inputs (DI1 to DI8).
The indication is done by means of the numbers 1 and 0, representing respectively the “Active” and “Inactive”
states of the inputs. The state of each input is considered as one digit in the sequence where DI1 represents
the least significant digit.
Example: In case the sequence 10100010 is presented on the keypad (HMI), it will correspond to the following
status of the DIs:
Table 13.6: Digital inputs status
DI8 DI7 DI6 DI5 DI4 DI3 DI2 DI1
Active
(+24 V)
Inactive
(0 V)
Active
(+24 V)
Inactive
(0 V)
Inactive
(0 V)
Inactive
(0 V)
Active
(+24 V)
Inactive
(0 V)
P0263 – DI1 Function
P0264 – DI2 Function
P0265 – DI3 Function
P0266 – DI4 Function
P0267 – DI5 Function
P0268 – DI6 Function
P0269 – DI7 Function