WEG CFW700, Programming And Troubleshooting Manual

Page: 173 / 223

Read only Parameters
16
CFW700 | 16-1
16 READ ONLY PARAMETERS
In order to facilitate the visualization of the main reading variables of the inverter, the group “READ” can be
accessed directly.
It is important to point out that all the parameters of that group can only be visualized on the keypad (HMI) display,
and that they do not allow changes by the user.
P0001 – Speed Reference
Adjustable
Range:
0 to 18000 rpm
Factory
Setting:
Properties: ro
Access groups
via HMI:
READ
Description:
This parameter presents, regardless of the origin source, the value of the speed reference in rpm (factory
setting).
It is also possible to change the speed reference (P0121) through this parameter, when P0221 or P0222=0.
P0002 – Motor Speed
Adjustable
Range:
0 to 18000 rpm Factory
Setting:
Properties:
ro
Access groups
via HMI:
READ
Description:
This parameter indicates the motor actual speed value in rpm (factory setting), with a 0.5 second filter.
It is also possible to change the speed reference (P0121) through this parameter, when P0221 or P0222=0.
P0003 – Motor Current
Adjustable
Range:
0.0 to 4500.0 A
Factory
Setting:
Properties: ro
Access groups
via HMI:
READ
Description:
It indicates the inverter output current in Amps (A).