Main cardan
90
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
14.8
Main cardan
Disassembly
1. Prepare the operating table (see chapter 7 on page 29).
2. Switch off the operating table and disconnect the internal
power supply (see chapter 10 on page 33).
3. Remove the table top (see chapter 12.1 on page 38).
4. Remove the bellows (see chapter 14.3 on page 78).
6. Unscrew the main cardan [1] from the mounting plate [2] (8
screws [3]). It is possible that the main cardan is seated
securely on the pins and may have to be tapped off the
mounting plate.
The upper guide block [4] slides downward as soon as the
main cardan [1] is removed from the mounting plate [2]. If that
is not the case, manually push the upper guide block
downward.
7. Remove the main cardan [1] from the upper guide block [4]
(5 screws [5]).
Assembly
1. Place the main cardan on the upper guide block and install it
(5 screws).
2. Pull the main cardan with the guide block upward and attach
to the mounting plate (8 screws).
3. Attach the bellows (see chapter 14.3 on page 78).
4. Attach the table top (see chapter 12.1 on page 38).
5. Attach the cover to the center box (see chapter 12.3 on
page 41).
6. Attach the pad plate to the seat section bars (see chapter 12.2
on page 40).
7. Establish the internal power supply, close the column cover
and turn on the operating table (see chapter 10 on page 33).
8. Put on the pad.
5.
CAUTION
Risk of injury from sinking
guide column!
When loosening the screw connection between the main
cardan and the mounting plate, the topmost guide block with
the main cardan can fall quickly due to its own weight and
cause severe injuries. During disassembly, do not grab
underneath the main cardan.
TEST
Perform function test and final check.
Summary of Contents for TruSystem 7000
