Toothed washer of the telescopic spindle
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
103
14.12
Toothed washer of the telescopic spindle
1. Prepare the operating table (see chapter 7 on page 29).
Note: The lifting position cannot be adjusted if the toothed
washer is defective.
2. Secure the star wheel (#1800121) on the left side rail
7)
of the
seat section.
Release the brake on the operating table (unlock the
operating table).
4. Switch off the operating table and disconnect the internal
power supply (see chapter 10 on page 33).
5. Slide the multifunction tool mounted as a T under the table
base.
6. Safety note: The operating table is extremely heavy; take extra
care not to strain your back when turning it on its side. A
second person is needed to turn the operating table on its side.
With the help of another person, lay the operating table over
onto the multifunction tool (side with the column keypad points
down) and set it on the star wheel.
Important: after placing the table on its side, do not activate the
hydraulics system with the column keypad to prevent air from
seeping into the hydraulic hoses.
7. Remove the subfloor cover [3] on the table base (4 screws).
8. Remove the telescopic spindle (see chapter 14.10 on
7)
Side with the column keypad
3.
CAUTION
Risk of material damage!
The major force required to turn the table on its side can break
the extended foot locks of the brake. The operating table must
be unlocked before turning it on its side.
Summary of Contents for TruSystem 7000
