Bellows
78
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
5. Open the column cover at the bottom to establish the power
supply (see chapter 8 on page 30).
6. Establish the internal power supply, close the column cover
and turn on the operating table (see chapter 10 on page 33).
7. Put on the pad.
14.3
Bellows
Disassembly
1. Prepare the operating table (see chapter 7 on page 29).
2. Switch off the operating table and disconnect the internal
power supply (see chapter 10 on page 33).
3. Remove the table top (see chapter 12.1 on page 38).
4. Detach the bellows [1] from the cover [4]. To do this, fold the
corner of the bellows up slightly to reveal the opening in the
column cover. At the left and the right in the
O
PEN
opening [2]
push the slider plate [3] toward
C
LOSE
.
5. Release the bellows from the mounting plate [5] (adhesive).
6. Note the mounting position of the bellows!
Pull the bellows upward from the column.
Assembly
1. Remove any adhesive residue from the edge of the mounting
plate and degrease.
2. Note the original mounting position of the bellows!
Pull the bellows on the column.
3. Slide the bellows down into the frame.
4. At the left and the right in the
C
LOSE
opening push the slider
plate toward
O
PEN
. Make sure the bellows frame connection
is closed.
5. Attach the upper end of the bellows to the mounting plate with
adhesive (one adhesive point per side) so that the bellows will
not slip when applying the table top.
6. Attach the table top (see chapter 12.1 on page 38).
7. Attach the cover to the center box (see chapter 12.3 on
page 41).
TEST
Perform a function test.
Summary of Contents for TruSystem 7000
