Trumpf TruSystem 7000, Service Manual

Page: 75 / 306

Mechanical parts of the column
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
75
14 Mechanical parts of the column
14.1 Column cover
Disassembly 1. Prepare the operating table (see chapter 7 on page 29).
2. Switch off the operating table and disconnect the internal
power supply (see chapter 10 on page 33).
3. Grasp the column cover, remove the holding screw from the
Trendelenburg assembly and guide the cover carefully
downward.
4. Open the column cover at the top and slide it down (see
chapter 9 on page 31).
5. Remove metal panels [1] to [4] from the outside, segment by
segment (4 sets of 2 screws).
6. Remove the metal panel with the column keypad (see
chapter 14.2 on page 77).
Assembly 1. Attach the metal panel with the column keypad to the frame
(see chapter 14.2 on page 77).
CAUTION
Risk of injury!
Always store tools and removed components securely and make
sure no one can trip or fall over them.
CAUTION
Risk of material damage!
Do not let screws, nuts or other parts fall into the operating table!
Immediately remove any parts that fell in. Parts that have not been
removed can damage other components or cables when the OR
table is adjusted. The operating table may not be released to the
customer if parts fell in and were not removed.
For all screws
≥ M4 without split lock washers, use a medium-
strength screw locking agent.