Cable W150
234
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
10. Unplug cable W150 [6] from the coupling point [7].
11. Pull both plugs at the other end of cable W150 [6] from the
line power socket [8].
12. Note the cable routing and attachment.
Unfasten cable W150 [6] from the line power socket [8] up
to the coupling point [7] and remove cable W150.
Assembly
1. Restore the original cable routing.
Route cable W150 in the table base
Insert the plug of cable W150 into the line power socket (see
circuit diagram on page 295).
3. Plug the plug at the other end of cable W150 into the socket
of the coupling point (see circuit diagram on page 295).
4. Refasten cable W150 from the line power socket motor up to
the coupling point.
5. Attach the cover over the coupling point on the table base (2
screws).
6. Restore the original cable routing. Check all connections on
the assembly to be sure they are secure.
Carefully insert the cover with the assembly into the table base
and mount it (4 screws with washers).
7. Mount the cover above the control module (4 screws).
8. Safety note: The operating table is extremely heavy; take extra
care not to strain your back while righting it. A second person
is needed to right the operating table. Clear the floor in front
of the operating table and clean it if necessary. Right the
operating table with the help of a second person.
9. Remove the multifunction tool.
10. Remove the toothed wheel.
11. Establish the internal power supply, close the column cover
and turn on the operating table (see chapter 10 on page 33).
12. Lock operating table (brake)
2.
CAUTION
Risk of material damage due to incorrect connector
pin assignment!
Do not interchange the connections! Maintain the plug and
socket assignments (see circuit diagram on page 295).
Summary of Contents for TruSystem 7000
