Lift motor assembly
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
115
6. Mount the bellows on the frame (see chapter 9 on page 31).
7. Open the column cover at the bottom to establish the power
supply (see chapter 8 on page 30).
8. Establish the internal power supply, close the column cover
and turn on the operating table (see chapter 10 on page 33).
9. Put on the pad.
10. Update the software (see the software description from the
CAN test center).
15.6
Lift motor assembly
Important: assembly requires serial number. Note chapter 27 on
Disassembly
1. Prepare the operating table to the extent possible (see chapter
2. Secure the star wheel (#1800121) on the left side rail
8)
of the
seat section.
Release the brake on the operating table (unlock the
operating table).
4. Switch off the operating table and disconnect the internal
power supply (see chapter 10 on page 33).
TEST
Perform recheck according to IEC 60601-1; perform function test
and final check.
WARNING
Risk of injury from sinking lifting column!
When the lift motor is loosened when the operating table is
standing, the table top drops suddenly due to its own weight and
this can lead to severe injuries. Turn the operating table on its side
before working on the lift motor.
8)
Side with the column keypad
3.
CAUTION
Risk of material damage!
The major force required to turn the table on its side can break
the extended foot locks of the brake. The operating table must
be unlocked before turning it on its side.
Summary of Contents for TruSystem 7000
