ISM module circuit board
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
139
15.16
ISM module circuit board
The ISM module is not available on all operating table versions.
15.16.1
Option A
The holder is located on the underside of the mounting plate [2] (left
side) in the ISM module [1]. The ISM module must be retrofitted.
See chapter 15.17 on page 141.
15.16.2
Option B
The holder is fitted on the top of the suspension plate [3] (left side)
in the ISM module [1].
Important: assembly requires serial number. Follow chapter 27 on
Disassembly
1. Prepare the operating table (see chapter 7 on page 29).
2. Switch off the operating table and disconnect the internal
power supply (see chapter 10 on page 33).
3. Detach the bellows from the cover, carefully guide it up and
affix it (see chapter 9 on page 31).
4. Pull the cable tie from the ISM module (the holder containing
the ISM module is located on the top of the suspension
plate [2] - left side).
5. Remove the plug from the ISM module [1].
6. Note the mounting position of the ISM module.
Remove the ISM module from the holder [3] (1 plastic screw).
Assembly
1. Note the original mounting position of the ISM module.
Install the ISM module on the holder (1 plastic screw).
Summary of Contents for TruSystem 7000
