Wheel
144
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
16.1
Wheel
Disassembly
1. Prepare the operating table (see chapter 7 on page 29).
2. Secure the star wheel (#1800121) on the side rail of the seat
section.
Release the brake on the operating table (unlock the
operating table).
4. Turn off the operating table.
5. Slide the multifunction tool mounted as a T under the table
base.
6. Safety note: The operating table is extremely heavy; take extra
care not to strain your back when turning it on its side. A
second person is needed to turn the operating table on its side.
With the help of another person, lay the operating table over
onto the multifunction tool and set it on the star wheel.
Important: after placing the table on its side, do not activate the
hydraulics system with the column keypad to prevent air from
seeping into the hydraulic hoses.
7. Remove the spring ring [3] from the floor lock [4] and pull off
the wheel [5].
Assembly
1. Slide the wheel onto the floor lock up to the stop.
2. Secure the spring ring in the groove of the floor lock.
3. Safety note: The operating table is extremely heavy; take extra
care not to strain your back while righting it. A second person
is needed to right the operating table. Clear the floor in front
of the operating table and clean it if necessary. Right the
operating table with the help of a second person.
4. Remove the multifunction tool.
5. Remove the toothed wheel.
3.
CAUTION
Risk of material damage!
The major force required to turn the table on its side can break
the extended foot locks of the brake. The operating table must
be unlocked before turning it on its side.
Summary of Contents for TruSystem 7000
