2. General Description
12
IFU for Infinite 200 PRO No. 30052730 Rev. No. 1.6
2016-04
2.1.2
Multifunctionality
Depending on the mode of wavelength selection, the
Infinite 200 PRO
is
available in two different versions:
Infinite M200 PRO
Infinite F200 PRO
The following measurement techniques are supported by the
Infinite M200 PRO:
Fluorescence Intensity (FI) Top
Fluorescence Intensity (FI) Bottom
Time-Resolved Fluorescence (TRF)
Fluorescence Resonance Energy Transfer (FRET)
Flash Fluorescence (with injectors)
Absorbance
Absorbance (with injectors)
Absorbance in cuvettes
Glow Luminescence
Flash Luminescence
Bioluminescence Resonance Energy Transfer (BRET)
A fully-equipped
Infinite F200 PRO
supports the following measurement
techniques:
Fluorescence Intensity (FI) Top
Fluorescence Intensity (FI) Bottom
Time-Resolved Fluorescence (TRF)
Fluorescence Resonance Energy Transfer (FRET)
Time-Resolved Fluorescence Resonance Energy Transfer (TR-FRET)
Flash Fluorescence (with injectors)
Fluorescence Polarization (FP)
Absorbance
Absorbance (with injectors)
Glow Luminescence
Flash Luminescence
Bioluminescence Resonance Energy Transfer (BRET)
AlphaScreen/AlphaLISA
Any common microplate ranging from 6 to 384 well formats conforming to the
ANSI/SBS standards (ANSI/SBS 1-2004; ANSI/SBS 2-2004, ANSI/SBS 3-2004
and ANSI/SBS 4-2004) may be measured with any of the above measurement
techniques. Switching between measurement techniques or plate formats is fully
automated via software. It is not necessary to manually reconfigure the optics in
order to switch between the reading modes supported by the Infinite 200 PRO.
Both instrument versions, the filter-based Infinite F200 PRO and the
monochromator-based Infinite M200 PRO, may be equipped with up to two
injectors.
