83
Nynja Build Manual 1.4d
5.3 Tailplane
The tailplane and elevators are assembled and trial fitted at this stage, and then
removed to fit the fuselage fairings.
5.3.1 Horizontal stabiliser
a) Select the four short cables, which brace the tail surfaces.
Figure 95 tail surfaces and bracing cables.
b) Attach the upper cables to the back of the vertical stabiliser.
These are the cables without turnbuckles .Mount the horizontal
stabilisers to the forward and rear mounts on the rear fuselage,
c) Fig 97
The nut securing the front of the tailplane halves may be tight against
the structure of the tailplane. If so, hold it flat against the structure and
turn the bolt to tighten it up.
If it is still too close for this to work, try loosening the lacing holding the
fabric as this may allow the tubes to spring out of the way.
The forward mounting should be left fairly loose to allow the halves to
pivot, and will have to be undone later when the fuselage fairings are
fitted, so do not threadlock it at this stage.
Figure 96 horizontal stabiliser rear mountings.
Summary of Contents for Nynja
