Skyranger Nynja, Build Manual

Page: 183 / 278

183
Nynja Build Manual 1.4d
A pop-rivet with the centre pushed out makes a neat cable guide for the
choke cables passing through the instrument panel. Secure the rivets
with a small piece of tubing pushed over the rear of them, or with a
touch of glue.
Figure 250 choke.
g) Air filters can be fitted now to the carburettors. The standard UK filter RU2780
requires a spacer ring to fit on the carb mouth. Make sure the filter is secure.
The cut edges of the ring may need trimming to allow the jubilee clip to fully
clamp the filters and rings to the carb.
h) Possible interference with bonnet
– the engine rocks quite a bit when starting.
On some Nynja’s it has been found that the choke cable guide on the
starboard carburettor in the position supplied from Rotax, can come in contact
with the bonnet and cracks can develop. We recommend unscrewing and
refitting cable to lie to the rear of the carburettor top.
Figure 251
– re routing choke guide tube
Change
this
To this