125
Nynja Build Manual 1.4d
motion so that the pulley is in the same plane as the cable, and moves
smoothly.
q) A short plastic sleeve should fitted over each of the central cabin tubes
SKR19
, immediately behind the front vertical
SKR14
, to form aileron horn
stops, Figure 151.
These will require cutting to slip over the tubes if not installed earlier,
and to allow packing out later to set the aileron deflections.
Figure 151 aileron stops.
r) Set the levelness of the ailerons with the turnbuckles at the ailerons, whilst the
centre turnbuckle simply takes up the slack.
Final adjustments to neutral position and control surface movement will
be done when the aircraft is complete.
s) Check the right and left joy stick movements for the proper aileron deflection:
stick left, left aileron up, right aileron down and vice-versa.
t) Check for any stiffness and binding.
u) Small pieces of prop-tape can be applied to tubes where the cables may
occasionally touch them, but the cables should not be rubbing continuously on
any tubes.
v)
If the cables are found to “slap” against the leading edge tubes within the
cabin area, either apply tape, or position a couple of cable ties or similar
around the leading edge tubes to act as buffers for the cables.
Summary of Contents for Nynja
