Skyranger Nynja, Build Manual

Page: 37 / 278

37
Nynja Build Manual 1.4d
a) Where the rear cabin frame cross-tube SKR40 crosses the rear cabin frame
diagonals SKR27 they should be connected with a bolt, pointing backwards.
UK MOD
– the holes will need drilling out to 6mm. Suitable 6mm bolts
are included with the wooden spreader bar pieces.
b) Paint the wooden tank spreader pieces with fuel-proof paint.
Fuel proof paint is available from model aircraft shops, an enjoyable but
potentially expensive visit!
c) Assemble the wooden fuel tank load spreading pieces on the rear end of
these bolts and tighten, but do not crush the wood excessively.
Ensure that the end of the bolt is below the level of the rear surface of
the wooden pieces. Long side faces outwards
Figure 32 fuel tank wooden tank spreader pieces.
2.7 Engine Supports
2.7.1 Rotax 912.
Figure 33 Rotax 912 engine mounts