87
Nynja Build Manual 1.4d
5.4 Rudder
5.4.1 Rudder horn assembly
Figure 101 rudder horn assembly (note: Skyranger rudder frame shown. Nynja Rudder is
slightly different shape).
a) Remove the fabric over the 6mm holes in the rudder leading edge spar with a
soldering iron.
These holes can be felt through the covering,
Put in place the bracing angles and secure them lightly with a 6mm
diameter, 35mm plain shank length bolt through the hole.
b) Position the angles so that the rear 4mm hole is just in front of the rear tube,
and just below the horizontal bracing tube.
This will be on the trailing edge of the rudder.
c) Burn a hole both sides of the fabric to accept the 4mm securing bolt.
d) Bolt this end together complete with the sheet U-brace between the aluminium
braces and the rudder covering.
e) Temporarily tighten the 4mm rear bolt and the 6mm front bolt.
f) Take the soldering iron and burn a slot in the fabric above the braces to
accept the rudder horn.
These slots should extend back approximately 80mm measured from
the centre of the tube. Use the edge of the braces as a guide and keep
the slots tight to their edges, Figure 102.
Summary of Contents for Nynja
