69
Nynja Build Manual 1.4d
4.2 Main Undercarriage
4.2.1 Brake calliper attachments
a) Check that the callipers are bolted together by the correct bolt to leave the
other two holes free to mount the calliper offset slightly to the rear of the
undercarriage legs. See Figure 88 for the manner in which the callipers are
intended to be mounted.
It will probably be necessary to swap the bolt holding the one of the
callipers together to the other hole. This will result in a handed pair of
callipers.
b) If not already done, drill an 8mm diameter hole in each undercarriage leg
18mm above the upper rear stub axle mounting holes, as shown in Figure 78.
Mark carefully, and recheck before drilling.
Use a small pilot drill
first, and recheck its position. Then drill out to the proper size.
Try to drill squarely. It is permissible to allow a little slop in the hole size,
to allow the callipers to find their own alignment.
Take care to make a handed pair.
The callipers and holes for them
are to the rear of the undercarriage legs, and at the narrow end of the
legs.
Figure 78 hole for brake calliper mounting.
Summary of Contents for Nynja
