Skyranger Nynja, Build Manual

Page: 193 / 278

193
Nynja Build Manual 1.4d
Disconnection would occur either by blowing of the fuse to the battery
or if the wire to terminal C on the regulator were to become
disconnected.
A suitable capacitor is available from Rotax/Skydrive. If only protection
from disconnection were required, a smaller capacitor could be used at
your own discretion.
j) Other optional items are shown on the wiring diagrams: they are an hour-
meter, a master-switch warning buzzer, and a start-button warning light.
k) Additional systems such as GPS, radio etc. should be individually protected by
fuses of the appropriate size.
16.4 Battery
a) All high current cables should be kept as short as possible.
b) The battery should be installed in its supporting box in the hole in the floor
between the central cabin tubes, underneath the dash board.
c) Secure with the webbing strap.
Figure 260 battery location.
Ensure that the engine block is well earthed to the airframe,
d) Figure 236. Here an extra hole has been drilled in the engine mount.
Alternatively, attach the earth to one of the existing bolts if enough thread
length is available.