Skyranger Nynja, Build Manual

Page: 166 / 278

166
Nynja Build Manual 1.4d
j) Fit the elbow at the front of the port water pipe assembly to the radiator.
It should be trimmed on the part closest to the water radiator to get the curve
forwards a s much as possible to give maximum clearance from the exhaust.
Make sure it is pushed home fully. Note all elbows are supplied over long and
should be trimmed for best fit. Before tightening the jubilee clips rotate the
elbows and piping to ensure best fit/maximum clearance.
Figure 218 port water hose.
k) The water overflow tank should be mounted on the port side of the firewall by
bending the securing strap around the indent in the tank and securing it to the
firewall with two 4mm screws. Use a square of self adhesive hook and loop
Velcro between overflow bottle and firewall. This will ensure no fretting.
An optional different style of overflow bottle may be supplied with integral bracket.
Note that either type should have an overflow pipe through the cap. This should
be routed down the side of the tank with its end expelling downwards.
Figure 219 overflow tank.
l) Finally, check the tightness of all the jubilee clips.