Skyranger Nynja, Build Manual

Page: 201 / 278

201
Nynja Build manual 1.4d
Fix into position. While one person holds the batten against the
underside of the top of the windscreen, another person can drill from
the top, through the Lexan.
Use 4mm black aluminium rivets to fix to the roof area Do not use any
rivets down the forward windscreen portion Secure the bottom end of
the screen centre batten using a 4mm bolt to pass through the
glassfibre upper rear cowling piece, the lexan and through the batten.
Fig 268 screen centre batten
o) With the left over Lexan, cut a triangular piece to fit in the corners of the
windscreen and tube SKR34 . Secure in place with rivets through tubes
SKR34 and through the cowlings.
A pair of vents such as those available from Light Aero Spares may be
fitted across the joins if desired.
Dress the rear side edges of the windscreen smooth with a sanding
block. Apply two lines of 1x10mm self adhesive foam strip to the edge,
where the door will overlap later.
Fig 269 windscreen side fillet, and vista vent
Note: rivet only from
here backwards