HMI alarms
11/2006
Overview of Alarms
2-621
©
Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
101018
Read-in possible only in active PLC status !
Definitions:
The current PLC status mode is not active, e.g. if the softkey "Change" was pressed.
Remedy:
Switch the PLC status to active.
101019
Not possible to initialize the HMI internal PLC status!
Definitions:
--
Remedy:
--
101020
Not possible to backup the HMI internal PLC status!
Definitions:
--
Remedy:
--
101100
No access rights !
Definitions:
The access level set is too low to open the selected window.
Remedy:
Enter a higher password.
101110
Error on overall reset
Definitions:
--
Remedy:
--
101111
No axes configured !
Definitions:
Due to an incomplete start-up, the image "Service axis" or "Axis machine data" cannot be selected.
Remedy:
Complete start-up.
101112
No drives configured !
Definitions:
Due to an incomplete start-up, the image "Service drive" cannot be selected.
Remedy:
Complete start-up.
101113
No channels configured !
Definitions:
Due to an incomplete start-up, the image "Channel machine data" cannot be selected.
Remedy:
Complete start-up.
101114
No MSD configured !
Definitions:
Due to an incomplete start-up or missing MSD drives, the image "MSD machine data" cannot be
selected.
Remedy:
--
101115
No FDD configured !
Definitions:
Due to an incomplete start-up or missing FDD/SLM drives, the image "FDD machine data" cannot be
selected.
Remedy:
--
101130
Error return value undefined: %1 %2
Parameters:
%1 = --
%2 = --
Definitions:
A function was called up in the start-up area that then, for unknown reasons, could not be executed.
Remedy:
When provided with the issued digits, the service may be able to help.
