2-15
©
Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
Overview of Alarms
2
Product: , Version: 1.0, Language: eng
2.1
NCK ALARMS
0
No (more) alarm(s) present
Definitions:
If the communication (variable service) requests more alarms than currently available in the alarm list,
this alarm is communicated as end-of-program function.
Reaction:
No alarm reaction.
Remedy:
--
Program
Continuation:
Internal
1000
System error %1
Parameters:
%1 = System error number
Definitions:
With this alarm, internal alarm states are displayed that, in conjunction with the transferred error
number, provide information on the cause and location of the error.
Reaction:
NC not ready.
Channel not ready.
NC Start disable in this channel.
Interface signals are set.
Alarm display.
NC Stop on alarm.
Remedy:
Make a note of the error text and contact Siemens A&D MC, Hotline
- Tel 0180 / 5050 - 222 (Germany)
- Fax 0180 / 5050 - 223
- Tel +49-180 / 5050 - 222 (International)
- Fax +49-180 / 5050 - 223
- email [email protected]
Program
Continuation:
Switch control OFF - ON.
1001
System error %1
Parameters:
%1 = System error number
Definitions:
With this alarm, internal alarm states are displayed that, in conjunction with the transferred error
number, provide information on the cause and location of the error.
Reaction:
Mode group not ready.
Channel not ready.
Interface signals are set.
Alarm display.
Remedy:
Make a note of the error text and contact Siemens AG A&D MC, Hotline (tel./fax: see alarm 1000)
Program
Continuation:
Clear alarm with the RESET key in all channels of this mode group. Restart part program.
