Siemens SINAMICS S150 NEMA, Operating Instructions Manual, Page: 241 / 862

Commissioning
5.3 Procedure for commissioning with STARTER
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
239
5.3.3 Transferring the drive project
You have created a project and saved it to your hard disk. You now have to transfer your
project configuration data to the drive unit.
Specifying the online access point
To connect to the target system, the chosen access point must be specified.
In the menu bar, select Target system > Select target devices ...; the following dialog screen
appears.
Figure 5-36 Target device selection and access points
The dialog screen lists all existing devices in the project.