Siemens SINAMICS S150 NEMA, Operating Instructions Manual

Page: 407 / 862

Operation
6.11 Communication via EtherNet/IP
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
405
Identity Object, Instance Number: 1 hex
Supported services
Class
•
Get Attribute all
• Get Attribute single
Instance
•
Get Attribute all
• Get Attribute single
•
Reset
Table 6- 39 Class Attribute
No. Service Type Name
1 get UINT16 Revision
2 get UINT16 Max Instance
3 get UINT16 Num of Instances
Table 6- 40 Instance Attribute
No. Service Type Name Value/explanation
1 get UINT16 Vendor ID 1251
2 get UINT16 Device Type
- Siemens Drive 0C hex
3 get UINT16 Product code r0964[1]
4 get UINT16 Revision
5 get UINT16 Status See the following table
6 get UINT32 Serial number Bits 0 ... 19: Consecutive number;
Bits 20 … 23: Production identifier
Bits 24 … 27: Month of manufacture (0 = Jan,
B = Dec)
Bits 28 … 31: Year of manufacture (0 = 2002)
7 get Short
String
Product name Max. length 32 bytes
Table 6- 41 Explanation for No. 5 of the previous table
Byte Bit Name Description
1 0 Owned 0: Converter is not assigned to a controller
1: Converter is assigned to a controller
1 Reserved
2 Configured 0: EtherNet/IP basic settings
1: Modified EtherNet/IP settings
3 Reserved
4 … 7 Extended
Device Status
0: Self-test or status not known
1: Firmware update active
2: At least one I/O connection with error
3: No I/O connections
4: Incorrect configuration in the ROM
5: Fatal fault
6: At least one I/O connection is active
7: All I/O connections in the quiescent state
8 … 15: Reserved
2 8 … 11 Not used
12 … 15 Reserved