Siemens SINAMICS S150 NEMA, Operating Instructions Manual, Page: 414 / 862

Operation
6.11 Communication via EtherNet/IP
Enclosed Drives
412
Operating Instructions, 12/2018, A5E36652151A
No. Service Type Name Value/explanation
5 get,
get_and
_clear
Struct of Media Counters Media-specific counters
UINT32 Alignment Errors Structure received, which does not match the
number of octets
UINT32 FCS Errors Structure received, which does not pass the FCS
check
UINT32 Single Collisions Structure successfully transmitted, precisely one
collision
UINT32 Multiple Collisions Structure successfully transmitted, several
collisions
UINT32 SQE Test Errors Number of SQE errors
UINT32 Deferred
Transmissions
First transmission attempt delayed
UINT32 Late Collisions Number of collisions that occurred delayed by 512
bit timers to the request
UINT32 Excessive
Collisions
Transmission unsuccessful as a result of intensive
collisions
UINT32 MAC Transmit
Errors
Transmission unsuccessful as a result of an
internal MAC sublayer transmission error.
UINT32 Carrier Sense
Errors
Number of errors when attempting to send a
request frame, where the transmission condition
was lost or was not assigned
UINT32 Frame Too Long Structure too large
UINT32 MAC Receive
Errors
Transmission unsuccessful as a result of an
internal MAC sublayer receive error.
6 get, set Struct of Interface Control -
UINT16 Control Bits -
UINT16 Forced Interface
Speed
-
10 get String Interface_Label Interface-Label
11 get - Interface capability Bit 0: Manual setting
Bit 1: Auto negotiate
Bit 2: Auto MDIX
Bit 3: Manual speed/duplex
Bits 4 – 31: Reserved
Rest: Speed/duplex options
Parameter Object, Instance Number: 401 hex
Supported services
Class
•
Get Attribute all Instance
•
Get Attribute all
•
Set Attribute single